MEGA 2560 R3 | CH340G ATmega2560 AVR USB board (ATMEGA2560 ) for arduino 2560

Please follow and like us:
Follow by Email

MEGA 2560 R3 !!!CH340G ATmega2560 AVR USB board (ATMEGA2560 ) for arduino 2560

Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G.
Board for functionality similar to the Arduino Mega 2560. It is a budget, but the same stable, and uses the original chips ATmega2560 (16 MHz).
The board used the chip CH340G as converter UART-USB. Chip CH340G – is a budget solution. When you work in the frequency 12Mhz, giving a stable result of data exchange (need install drivers to computer).
Mega 2560 CH340G / ATmega2560 – connects to the computer via microUSB cable (used for almost all Android smartphones).
You can supply power to board through the MicroUSB connector or DC Barel Jack power connector. The voltage regulator (LDO) can deal with incoming voltage from 6V to 12V (peack 18V) DC. Output current for 5V – about 800mA, for 3.3V – about 180mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects.

This version is not suitable for 3D printer,

Product Description

CH340G Replace ATMEGA16U2
Operating Voltage:5V
Input Voltage (recommended):7-12V
Input Voltage (limits):6-20V
Digital I/O Pins:54 (of which 15 provide PWM output)
Analog Input Pins:16
DC Current per I/O Pin:40 mA
DC Current for 3.3V Pin:50 mA
Flash Memory:256 KB of which 8 KB used by bootloader
Clock Speed:16 MHz

Method of use:

1. Download the arduino IDE
Download address: (copy open)
2. Download the USB chip driver
Download address: Id = 126
3. Plug in the NANO development board, the driver is automatically installed
4. Select NANO in die
5. Select the COM port, this can query in “my computer”

Package included:

1 x MEGA2560 R3 Board

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.